Glossary Aerodynamics & Flight

升力 (Lift)

Definition

垂直于气流方向作用、使飞机保持在空中的气动力。

什么是升力?

Lift is the aerodynamic force that acts perpendicular to the relative airflow and supports an aircraft in flight. It is the fundamental force that opposes gravity and allows heavier-than-air machines to become airborne. Without sufficient lift, no aircraft — from a Cessna 172 to an Airbus A380 — can remain aloft.

工作原理

Lift is generated primarily by the wings as air flows over and under them. Two complementary principles explain its generation:

  • Bernoulli's Principle: The wing's cambered (curved) upper surface forces air to travel a longer path than the flatter lower surface. This accelerates the upper airflow, reducing pressure above the wing. The higher pressure beneath the wing pushes upward, producing lift.
  • Newton's Third Law: The wing deflects incoming air downward. The reaction force pushes the wing — and the aircraft — upward.

Lift (L) is calculated as: L = ½ × ρ × V² × S × CL, where ρ is air density, V is airspeed, S is wing area, and CL is the coefficient of lift. This formula shows that doubling airspeed quadruples lift — a critical relationship for pilots during takeoff and approach.

在航空中的重要性

Lift determines an aircraft's maximum takeoff weight, cruise altitude, and approach speed. Wing design — including aspect ratio, camber, and sweep — is optimized to maximize lift while minimizing drag. High-lift devices such as flaps and slats increase the wing's CL during low-speed flight, allowing aircraft to operate at manageable V-speeds on shorter runways.

The angle of attack directly controls lift up to the critical AoA, beyond which a stall occurs. Pilots must manage this relationship constantly, especially during takeoff rotation and final approach.

实际影响

The Boeing 747-400 generates approximately 900,000 lbf of lift at maximum takeoff weight — enough to keep 412 tonnes airborne across the Pacific. The Airbus A380's 845 m² wing area is specifically designed to generate adequate lift at relatively low approach speeds, reducing stress on airframe and runway. In contrast, the Concorde used a delta wing that generated lift through vortex flow rather than classical Bernoulli effects, allowing it to cruise efficiently at Mach 2.

Frequently Asked Questions

What is 升力?
垂直于气流方向作用、使飞机保持在空中的气动力。
Why is 升力 important in aviation?
什么是升力? Lift is the aerodynamic force that acts perpendicular to the relative airflow and supports an aircraft in flight. It is the fundamental force that opposes gravity and allows heavier-than-air machines to become airborne.
What are examples of 升力?
Common examples of 升力 include: Boeing 747-400 generating lift across transoceanic routes, Airbus A380 wing designed for high lift at low approach speeds, Cessna 172 using cambered wings for slow-speed general aviation flight.
How does 升力 relate to other aviation concepts?
升力 is closely related to V速度 and 地面效应, among other key aviation concepts.

More in Aerodynamics & Flight