Glossary Engines & Propulsion

Özgül Yakıt Tüketimi (SFC: Specific Fuel Consumption)

Definition

Motor yakıt verimliliğinin ölçüsü: saat başına üretilen birim itme başına tüketilen yakıt kütlesi; lb/(lbf·h) veya kg/(kN·h) olarak ifade edilir.

Nedir Specific Fuel Consumption?

Specific Fuel Consumption (SFC) — also called Thrust Specific Fuel Consumption (TSFC) for jet engines — quantifies how efficiently an engine converts fuel energy into useful thrust. It expresses the mass of fuel burned per unit of thrust per unit of time. A lower SFC means a more fuel-efficient engine: less fuel is consumed to produce the same thrust, directly extending range and reducing operating costs.

Nasıl Çalışır

SFC is calculated as:

  • SFC = (fuel flow rate) / (net thrust produced)
  • In imperial units: lb of fuel per hour per lbf of thrust → lb/(lbf·h)
  • In SI units: kg per hour per kN → kg/(kN·h) or equivalently mg/(N·s)

Key factors that influence SFC:

  • Bypass Ratio: Higher Bypass Ratio dramatically improves SFC by accelerating more air at lower velocity. Doubling BPR from 5:1 to 10:1 can improve SFC by 10–15%.
  • Overall Pressure Ratio (OPR): Higher compression improves thermodynamic efficiency. Modern engines achieve OPR of 45–60:1 vs. 15–20:1 in 1960s jets.
  • Turbine Inlet Temperature (TIT): Higher TIT improves Carnot efficiency. Enabled by ceramic thermal barrier coatings and film cooling.
  • Altitude: SFC improves at cruise altitude because cooler air increases the density ratio and reduces intake ram drag penalties.
  • Airspeed: SFC increases at higher Mach numbers due to ram drag — a key economic penalty for supersonic flight.

Performans Özellikleri

  • CFM56-7B (737 NG, circa 1997): ~0.545 lb/(lbf·h) at cruise
  • CFM LEAP-1B (737 MAX, 2017): ~0.490 lb/(lbf·h) — approximately 15% improvement
  • Pratt & Whitney PW1100G (A320neo, 2016): ~0.460–0.480 lb/(lbf·h) — best in class for single-aisle
  • Rolls-Royce Trent XWB (A350, 2015): ~0.478 lb/(lbf·h) — best SFC of any large turbofan at launch
  • Concorde Olympus 593 (supersonic): ~1.195 lb/(lbf·h) — over twice modern turbofans due to low BPR and supersonic penalties

Uçak Örnekleri

  • Boeing 787-9 (GEnx-1B): SFC ~0.486 lb/(lbf·h); combined with composite airframe yields 25% better fuel burn per seat than 767
  • Airbus A320neo (PW1100G): 20% better fuel efficiency than A320ceo, driven largely by SFC improvement plus airframe drag reduction
  • ATR 72-600 (PW127M turboprop): Turboprops use shaft-horsepower SFC (lb/SHP·h): ~0.48 — far better than jets for short sectors below 400 nm
  • Future Open Fan (CFM RISE program): Targeting 20% SFC improvement over LEAP by ~2035 using unducted fan architecture with BPR >20:1

SFC is the core metric linking engine efficiency to aircraft range. Engineers use the Breguet range equation, in which SFC appears as a direct denominator — halving SFC doubles range for a given fuel load.

Frequently Asked Questions

What is Özgül Yakıt Tüketimi (SFC)?
Motor yakıt verimliliğinin ölçüsü: saat başına üretilen birim itme başına tüketilen yakıt kütlesi; lb/(lbf·h) veya kg/(kN·h) olarak ifade edilir.
What does SFC stand for?
SFC stands for Özgül Yakıt Tüketimi (SFC). Motor yakıt verimliliğinin ölçüsü: saat başına üretilen birim itme başına tüketilen yakıt kütlesi; lb/(lbf·h) veya kg/(kN·h) olarak ifade edilir.
Why is Özgül Yakıt Tüketimi (SFC) important in aviation?
Nedir Specific Fuel Consumption? Specific Fuel Consumption (SFC) — also called Thrust Specific Fuel Consumption (TSFC) for jet engines — quantifies how efficiently an engine converts fuel energy into useful thrust.
What are examples of Özgül Yakıt Tüketimi (SFC)?
Common examples of Özgül Yakıt Tüketimi (SFC) include: CFM LEAP-1B SFC ~0.490 lb/(lbf·h) on Boeing 737 MAX, PW1100G SFC ~0.460–0.480 lb/(lbf·h) on Airbus A320neo, Concorde Olympus 593 SFC ~1.195 lb/(lbf·h) at supersonic cruise.
How does Özgül Yakıt Tüketimi (SFC) relate to other aviation concepts?
Özgül Yakıt Tüketimi (SFC) is closely related to Baypas Oranı and Dişlili Turbofan, among other key aviation concepts.

More in Engines & Propulsion