Glossary Engines & Propulsion

비연료소비율 (SFC) (SFC: Specific Fuel Consumption)

Definition

엔진 연료 효율의 척도: 시간당 생산된 추력 단위당 소비되는 연료 질량으로, lb/(lbf·h) 또는 kg/(kN·h)로 표시된다.

What Is Specific Fuel Consumption?

Specific Fuel Consumption (SFC) — also called Thrust Specific Fuel Consumption (TSFC) for jet engines — quantifies how efficiently an engine converts fuel energy into useful thrust. It expresses the mass of fuel burned per unit of thrust per unit of time. A lower SFC means a more fuel-efficient engine: less fuel is consumed to produce the same thrust, directly extending range and reducing operating costs.

How It Works

SFC is calculated as:

  • SFC = (fuel flow rate) / (net thrust produced)
  • In imperial units: lb of fuel per hour per lbf of thrust → lb/(lbf·h)
  • In SI units: kg per hour per kN → kg/(kN·h) or equivalently mg/(N·s)

Key factors that influence SFC:

  • Bypass Ratio: Higher Bypass Ratio dramatically improves SFC by accelerating more air at lower velocity. Doubling BPR from 5:1 to 10:1 can improve SFC by 10–15%.
  • Overall Pressure Ratio (OPR): Higher compression improves thermodynamic efficiency. Modern engines achieve OPR of 45–60:1 vs. 15–20:1 in 1960s jets.
  • Turbine Inlet Temperature (TIT): Higher TIT improves Carnot efficiency. Enabled by ceramic thermal barrier coatings and film cooling.
  • Altitude: SFC improves at cruise altitude because cooler air increases the density ratio and reduces intake ram drag penalties.
  • Airspeed: SFC increases at higher Mach numbers due to ram drag — a key economic penalty for supersonic flight.

Performance Specifications

  • CFM56-7B (737 NG, circa 1997): ~0.545 lb/(lbf·h) at cruise
  • CFM LEAP-1B (737 MAX, 2017): ~0.490 lb/(lbf·h) — approximately 15% improvement
  • Pratt & Whitney PW1100G (A320neo, 2016): ~0.460–0.480 lb/(lbf·h) — best in class for single-aisle
  • Rolls-Royce Trent XWB (A350, 2015): ~0.478 lb/(lbf·h) — best SFC of any large turbofan at launch
  • Concorde Olympus 593 (supersonic): ~1.195 lb/(lbf·h) — over twice modern turbofans due to low BPR and supersonic penalties

Aircraft Examples

  • Boeing 787-9 (GEnx-1B): SFC ~0.486 lb/(lbf·h); combined with composite airframe yields 25% better fuel burn per seat than 767
  • Airbus A320neo (PW1100G): 20% better fuel efficiency than A320ceo, driven largely by SFC improvement plus airframe drag reduction
  • ATR 72-600 (PW127M turboprop): Turboprops use shaft-horsepower SFC (lb/SHP·h): ~0.48 — far better than jets for short sectors below 400 nm
  • Future Open Fan (CFM RISE program): Targeting 20% SFC improvement over LEAP by ~2035 using unducted fan architecture with BPR >20:1

SFC is the core metric linking engine efficiency to aircraft range. Engineers use the Breguet range equation, in which SFC appears as a direct denominator — halving SFC doubles range for a given fuel load.

Frequently Asked Questions

What is 비연료소비율 (SFC) (SFC)?
엔진 연료 효율의 척도: 시간당 생산된 추력 단위당 소비되는 연료 질량으로, lb/(lbf·h) 또는 kg/(kN·h)로 표시된다.
What does SFC stand for?
SFC stands for 비연료소비율 (SFC) (SFC). 엔진 연료 효율의 척도: 시간당 생산된 추력 단위당 소비되는 연료 질량으로, lb/(lbf·h) 또는 kg/(kN·h)로 표시된다.
Why is 비연료소비율 (SFC) (SFC) important in aviation?
What Is Specific Fuel Consumption? Specific Fuel Consumption (SFC) — also called Thrust Specific Fuel Consumption (TSFC) for jet engines — quantifies how efficiently an engine converts fuel energy into useful thrust.
What are examples of 비연료소비율 (SFC) (SFC)?
Common examples of 비연료소비율 (SFC) (SFC) include: CFM LEAP-1B SFC ~0.490 lb/(lbf·h) on Boeing 737 MAX, PW1100G SFC ~0.460–0.480 lb/(lbf·h) on Airbus A320neo, Concorde Olympus 593 SFC ~1.195 lb/(lbf·h) at supersonic cruise.
How does 비연료소비율 (SFC) (SFC) relate to other aviation concepts?
비연료소비율 (SFC) (SFC) is closely related to 바이패스비 (BPR) and 기어드 터보팬 (Geared Turbofan), among other key aviation concepts.

More in Engines & Propulsion