Glossary Engine Technology

Getriebe-Turbofan (GTF: Geared Turbofan)

Definition

Ein Turbofan-Design, das ein Untersetzungsgetriebe zwischen Gebläse und Niederdruckturbine verwendet, sodass jedes mit optimaler Drehzahl laufen kann.

What Is a Geared Turbofan?

A geared turbofan (GTF) is an advanced turbofan engine that interposes a planetary reduction gearbox between the large front fan and the low-pressure turbine (LPT) shaft. This mechanical decoupling is the defining innovation: the fan and turbine can each rotate at their individually optimal speeds rather than being locked to the same shaft speed.

How It Works

In a conventional turbofan, the fan, low-pressure compressor, and low-pressure turbine are all mounted on a single shaft. Because the large fan must turn slowly to avoid supersonic blade-tip speeds, the LPT is forced to operate below its aerodynamically ideal speed — a fundamental efficiency compromise.

The GTF's gearbox, typically with a reduction ratio of approximately 3:1, allows the LPT to spin roughly three times faster than the fan. The LPT can therefore be designed with fewer stages (typically 3 vs. 7 in equivalent conventional engines), reducing weight and parts count. The fan, freed from shaft-speed constraints, grows larger — enabling bypass ratios of 12:1 or higher — while spinning at speeds that minimize aerodynamic losses.

Performance Specifications

  • Gearbox reduction ratio: approximately 3.0:1 (Pratt & Whitney PW1000G series)
  • Bypass ratio: 12:1 on PW1100G (A320neo), 12.2:1 on PW1500G (CSeries/A220)
  • Fuel burn improvement: 15–20% over CFM56/V2500 predecessors
  • Noise reduction: approximately 75% reduction in noise footprint vs. prior generation
  • LPT stages: 3 (vs. 6–7 in ungeared equivalents)

Aircraft Examples

The geared turbofan concept, pioneered by Pratt & Whitney with over $10 billion in development investment spanning two decades, entered revenue service in January 2016. By 2025 the engine family had accumulated over 30 million flight hours across more than 1,500 aircraft.

Frequently Asked Questions

What is Getriebe-Turbofan (GTF)?
Ein Turbofan-Design, das ein Untersetzungsgetriebe zwischen Gebläse und Niederdruckturbine verwendet, sodass jedes mit optimaler Drehzahl laufen kann.
What does GTF stand for?
GTF stands for Getriebe-Turbofan (GTF). Ein Turbofan-Design, das ein Untersetzungsgetriebe zwischen Gebläse und Niederdruckturbine verwendet, sodass jedes mit optimaler Drehzahl laufen kann.
Why is Getriebe-Turbofan (GTF) important in aviation?
What Is a Geared Turbofan? A geared turbofan (GTF) is an advanced turbofan engine that interposes a planetary reduction gearbox between the large front fan and the low-pressure turbine (LPT) shaft.
What are examples of Getriebe-Turbofan (GTF)?
Common examples of Getriebe-Turbofan (GTF) include: Pratt & Whitney PW1100G on Airbus A320neo, PW1500G on Airbus A220, PW1900G on Embraer E2.
How does Getriebe-Turbofan (GTF) relate to other aviation concepts?
Getriebe-Turbofan (GTF) is closely related to Nebenstromverhältnis (Bypass Ratio) and Spezifischer Kraftstoffverbrauch (SFC), among other key aviation concepts.

More in Engine Technology